Forums :: Resources :: Features :: Photo Gallery :: Vintage Radio Shows :: Archives :: Books
Support This Site: Contributors :: Advertise


It is currently Sep Fri 21, 2018 12:59 am


All times are UTC [ DST ]





Post New Topic Post Reply  [ 8 posts ] 
Author Message
 Post subject: Part 15 AM transmitter hum reduction
PostPosted: Mar Thu 01, 2018 4:21 pm 
Member
User avatar

Joined: Jan Thu 01, 1970 1:00 am
Posts: 19034
Location: Warner Robins, GA
Does your part 15 AM transmitter hum?

Do you want a solution that effectively reduces hum?

All you need to do are these two things.

1. Install an Edcor WSM15K/15K balanced/unbalanced to balanced/unbalanced audio transformer.

https://www.edcorusa.com/wsm_series

If building a transmitter or there is room in an existing transmitter install the transformer inside the case for the transmitter.

Can be added to an existing transmitter where there's no room in the case by installing in a box and using as short of a cable as possible between the box and transmitter.

What that does is

1. Isolates the transmitter's circuit ground from the input ground
2. Ensures the only ground is the transmitter's ground which ensures there's no ground loop
3. Eliminates the effect on the transmitter from
..A. The audio cable
..B. The source
..C. The source's power supply cable
..D. The source's power supply
..E. Anything else plugged into the source if the source is for instance an output jack on your stereo system or computer




2. Install a ground lift switch

Some radios hum less with the transmitter ground connected.
Some radios hum less with the transmitter ground disconnected.

I have yet to test a transmitter grounded directly to a ground rod. Perhaps that would reduce hum even more or make it to where the ground can be permanently connected.


Last edited by Tube Radio on Mar Fri 02, 2018 5:01 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Part 15 AM transmitetr hum reduction
PostPosted: Mar Thu 01, 2018 8:20 pm 
Member
User avatar

Joined: Mar Sun 11, 2007 6:55 am
Posts: 9960
Location: Mission Viejo, southern California
Thanks, I will try that.

_________________
many of my radios http://s269.photobucket.com/user/FSteph ... t=3&page=1


Top
 Profile  
 
 Post subject: Re: Part 15 AM transmitetr hum reduction
PostPosted: Mar Fri 02, 2018 12:13 am 
Member
User avatar

Joined: Jan Thu 01, 1970 1:00 am
Posts: 19034
Location: Warner Robins, GA
You're welcome.


Top
 Profile  
 
 Post subject: Re: Part 15 AM transmitetr hum reduction
PostPosted: Mar Fri 02, 2018 1:02 am 
Member
User avatar

Joined: Jan Thu 01, 1970 1:00 am
Posts: 28642
Location: SoCal, 91387
My SSTrans wasn't giving me the cleanest of signal reception, but after reading some of the information on the board, I relocated it so that it's vertical antenna lead went up against a section of wall that had no electrical cable inside. The difference was like night and day.

_________________
\\\\\\\\\\\\\\\\\\\\\\\\He Who Dies With The Most Radios Wins//////////////////


Top
 Profile  
 
 Post subject: Re: Part 15 AM transmitter hum reduction
PostPosted: Mar Fri 02, 2018 5:02 am 
Member
User avatar

Joined: Jan Thu 01, 1970 1:00 am
Posts: 19034
Location: Warner Robins, GA
That can greatly affect the transmitter as well.


Top
 Profile  
 
 Post subject: Re: Part 15 AM transmitter hum reduction
PostPosted: Jul Fri 06, 2018 3:13 am 
Member
User avatar

Joined: Sep Mon 18, 2017 2:23 am
Posts: 1616
Location: Plymouth, MI
I don't have any signal problems using this transmitter.

Attachment:
AM TRANS.jpg
AM TRANS.jpg [ 6.94 KiB | Viewed 335 times ]

_________________
Dan

I know just enough to be dangerous.....
(Member - Michigan Antique Radio Club)


Top
 Profile  
 
 Post subject: Re: Part 15 AM transmitter hum reduction
PostPosted: Jul Fri 06, 2018 4:31 am 
Member
User avatar

Joined: Mar Sun 11, 2007 6:55 am
Posts: 9960
Location: Mission Viejo, southern California
atwaterkent1 wrote:
I don't have any signal problems using this transmitter.

Attachment:
AM TRANS.jpg
I bought one of those to try and will report on how it performs for me.

Finding a place in the house with no wires or pipes in the wall which is also a reasonable place for a transmitter is not as easy as it sounds.

_________________
many of my radios http://s269.photobucket.com/user/FSteph ... t=3&page=1


Top
 Profile  
 
 Post subject: Re: Part 15 AM transmitter hum reduction
PostPosted: Jul Fri 06, 2018 4:42 am 
Member
User avatar

Joined: Jan Thu 01, 1970 1:00 am
Posts: 28642
Location: SoCal, 91387
I don't believe that you have to worry about plumbing pipes, Stephen; it's the AC lines that cause the havoc.

_________________
\\\\\\\\\\\\\\\\\\\\\\\\He Who Dies With The Most Radios Wins//////////////////


Top
 Profile  
 
Post New Topic Post Reply  [ 8 posts ]  Moderator: Chuck Schwark

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest



Search for:
Jump to:  
























Privacy Policy :: Powered by phpBB