Forums :: Resources :: Features :: Photo Gallery :: Vintage Radio Shows :: Archives :: Books
Support This Site: Contributors :: Advertise


It is currently Nov Fri 28, 2014 1:11 pm


All times are UTC [ DST ]



Post New Topic Post Reply  [ 8 posts ] 
Author Message
 Post subject: WTB Atwater Kent knobs
PostPosted: Jul Sat 23, 2011 12:54 pm 
Member
User avatar

Joined: Aug Sun 13, 2006 6:37 pm
Posts: 275
Location: Pittsburgh, PA
I am looking to buy two Atwater Kent cathedral model 627 knobs. They are the lower two knobs on the front panel. See this link: http://radioattic.com/item_sold.htm?radio=0960518

Thanks!

Joe


Top
 Profile  
 
 Post subject: Re: WTB Atwater Kent knobs
PostPosted: Jul Sun 24, 2011 12:13 am 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 3834
Location: Malone, New York USA
Hi-
Measuring 1 3/8" skirt diameter?
If so, I have two clean ones...$12 for both, postage to USA included.
Please E-mail me if interested.


Top
 Profile  
 
 Post subject: Re: WTB Atwater Kent knobs
PostPosted: Jul Sun 24, 2011 3:49 am 
Member

Joined: Apr Wed 23, 2008 2:34 am
Posts: 376
Location: Vinton, Louisiana
Joe,
The good news is that the 2 in your attached picture a pretty easy to find and a lot of people use them for the 627.
The bad news is that those are not actually the correct ones.

I'm pretty sure these are the right ones.

http://www.atwaterkentradio.com/ak627.htm

I have a couple of original 627's and they both have knobs like these.

_________________
Thanks,
Jimmy

http://www.atwaterkentsrus.com


Top
 Profile  
 
 Post subject: Re: WTB Atwater Kent knobs
PostPosted: Jul Sun 24, 2011 7:23 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 27947
Location: Pocasset, Cape Cod, MA
Attachment:
P7240124.JPG
P7240124.JPG [ 37.42 KiB | Viewed 430 times ]

Here's mine. I bought it at a church auction in the late 1950s and am confident the knobs are original.


Top
 Profile  
 
 Post subject: Re: WTB Atwater Kent knobs
PostPosted: Jul Sun 24, 2011 7:33 pm 
Member
User avatar

Joined: Aug Sun 13, 2006 6:37 pm
Posts: 275
Location: Pittsburgh, PA
Thanks for the information and help guys. Much appreciated!

Dennis, please check your email.

Joe


Top
 Profile  
 
 Post subject: Re: WTB Atwater Kent knobs
PostPosted: Jul Mon 25, 2011 12:49 am 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 1238
Location: Hollywood, Maryland
Wow Alan, you have owned that Atwater Kent longer than I have been alive, and I am no youngster.

David


Top
 Profile  
 
 Post subject: Re: WTB Atwater Kent knobs
PostPosted: Jul Mon 25, 2011 1:02 am 
Member

Joined: Apr Wed 23, 2008 2:34 am
Posts: 376
Location: Vinton, Louisiana
Alan's 627 is correct.

_________________
Thanks,
Jimmy

http://www.atwaterkentsrus.com


Top
 Profile  
 
 Post subject: Re: WTB Atwater Kent knobs
PostPosted: Jul Mon 25, 2011 1:16 am 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 27947
Location: Pocasset, Cape Cod, MA
Cost me $1.25. Would have been $.75 but my brother was bidding too, not knowing I was.


Top
 Profile  
 
Post New Topic Post Reply  [ 8 posts ]  Moderator: Philco Fan

All times are UTC [ DST ]


Who is online

Users browsing this forum: Philcokid, Rubrburnr and 6 guests



Search for:
Jump to:  
















Privacy Policy :: Powered by phpBB