Forums :: NEW! Web Resources :: Features :: Photo Gallery :: Vintage Radio Shows :: Archives
Support This Site: Contributors :: Advertise


It is currently Nov Sat 28, 2020 4:20 am


All times are UTC [ DST ]






Post New Topic Post Reply  [ 3 posts ] 
Author Message
 Post subject: WTB: Speaker for my Atwater Kent 60
PostPosted: Aug Sun 30, 2020 3:17 am 
Member

Joined: Apr Tue 28, 2020 11:52 pm
Posts: 32
Hello all,

My Atwater Kent Model 60 speaker has a tear in it. So, I'm looking for a replacement speaker, the inner part that's torn, or whatever I can get to restore it's sound. Thanks everyone!

Jason Rearick
Indiana, PA


Top
 Profile  
 
 Post subject: Re: WTB: Speaker for my Atwater Kent 60
PostPosted: Sep Wed 02, 2020 10:24 pm 
Member

Joined: Aug Wed 26, 2009 1:45 am
Posts: 3191
Location: Sioux Falls, SD 57108
I have a speaker from a battery Atwater Kent model 67. The cone has some wrinkles but is not torn. I could try to remove the field coil and cord and just send the cone and frame. That would reduce the shipping cost and help to prevent damage in shipping. I have not done this before so no guarantees. The outside diameter is about 11". I would "THINK" that the cone would be the same between the battery and AC radios but you would have to verify that. Let me know if you are interested. $10 plus shipping for just the cone and frame. No field coil or cord.


Attachments:
IMG_6575.JPG
IMG_6575.JPG [ 253.63 KiB | Viewed 156 times ]
IMG_6576.JPG
IMG_6576.JPG [ 251.37 KiB | Viewed 156 times ]
IMG_6577.JPG
IMG_6577.JPG [ 330.09 KiB | Viewed 156 times ]
IMG_6578.JPG
IMG_6578.JPG [ 285.66 KiB | Viewed 156 times ]
IMG_6579.JPG
IMG_6579.JPG [ 238.94 KiB | Viewed 156 times ]

_________________
Don
Top
 Profile  
 
 Post subject: Re: WTB: Speaker for my Atwater Kent 60
PostPosted: Sep Sun 27, 2020 5:04 pm 
Member

Joined: Apr Tue 28, 2020 11:52 pm
Posts: 32
dsturz wrote:
I have a speaker from a battery Atwater Kent model 67. The cone has some wrinkles but is not torn. I could try to remove the field coil and cord and just send the cone and frame. That would reduce the shipping cost and help to prevent damage in shipping. I have not done this before so no guarantees. The outside diameter is about 11". I would "THINK" that the cone would be the same between the battery and AC radios but you would have to verify that. Let me know if you are interested. $10 plus shipping for just the cone and frame. No field coil or cord.


Ok, I'll have to measure mine to see if it's a fit. Thanks!


Top
 Profile  
 
Post New Topic Post Reply  [ 3 posts ]  Moderators: Alan Voorhees, Philco Fan

All times are UTC [ DST ]


Who is online

Users browsing this forum: Als_Basement, edison64, jimbenedict, madsowry, ssmolkin and 6 guests



Search for:
Jump to:  




































Privacy Policy :: Powered by phpBB