Forums :: Resources :: Features :: Photo Gallery :: Vintage Radio Shows :: Archives :: Books
Support This Site: Contributors :: Advertise


It is currently May Wed 22, 2019 9:45 pm


All times are UTC [ DST ]





Post New Topic Post Reply  [ 6 posts ] 
Author Message
 Post subject: Sansui 9090DB schematic needed
PostPosted: Feb Tue 17, 2004 7:35 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 52
Location: Shelton, WA, US
Would appreciate any help in obtaining this one. It has an overload protection light that's on all the time. I'm not absolutely sure but it may be in the Sam's MHP 239 folder. Any suggestions or help greatly appreciated. It's a nice 120 watt receiver that I'd like to help a friend out with. Thanks<P>------------------<BR>


Top
 Profile  
 
 Post subject: Sansui 9090DB schematic needed
PostPosted: Feb Wed 18, 2004 2:20 am 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 386
Location: N. E. Ohio
Hi,<BR>Look at this link- it may help you: <A HREF="http://www.audiokarma.org/forums/showthread.php?s=5b0f619ef0f27f5e51e5d6fe46bc404a&threadid=13930" TARGET=_blank>http://www.audiokarma.org/forums/showthread.php?s=5b0f619ef0f27f5e51e5d6fe46bc404a&threadid=13930</A> <P>------------------<BR>Dave Augustine KC8RKC


Top
 Profile  
 
 Post subject: Sansui 9090DB schematic needed
PostPosted: Feb Wed 18, 2004 6:24 am 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 52
Location: Shelton, WA, US
Much obliged for your help Dave. I'll check this out tomorrow. Probably would have been looking for a lifetime plus without your direction.<P>------------------<BR>


Top
 Profile  
 
 Post subject: Sansui 9090DB schematic needed
PostPosted: Feb Wed 18, 2004 3:31 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 9904
Location: Toledo, Ohio
I have one that I can scan and send you tonight when I get home from work.<P>------------------<BR>Jim


Top
 Profile  
 
 Post subject: Sansui 9090DB schematic needed
PostPosted: Feb Thu 19, 2004 3:26 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 9904
Location: Toledo, Ohio
Scanner crapped last night. I will try again this evening.<BR><P>------------------<BR>Jim


Top
 Profile  
 
 Post subject: Sansui 9090DB schematic needed
PostPosted: Feb Thu 19, 2004 7:32 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 52
Location: Shelton, WA, US
Hi Jim. Thanks for your efforts in trying to get the doc. to me but let me see as been suggested if those two 180 ohm resistors are open. If so than I'll replace them with 1/2 watt. The filters are about $25.00 each (2) and I don't want to get into it for that kind of money. Appreciate your time and hope you get the scanner up and running w/o too much trouble.<P>Bill<P>------------------<BR>


Top
 Profile  
 
Post New Topic Post Reply  [ 6 posts ]  Moderators: Marcc, Norm Leal

All times are UTC [ DST ]


Who is online

Users browsing this forum: Google [Bot], jbees, JnTX, madsowry, solderfumes, spsquires and 2 guests



Search for:
Jump to:  




























Privacy Policy :: Powered by phpBB