Forums :: Resources :: Features :: Photo Gallery :: Vintage Radio Shows :: Archives
Support This Site: Contributors :: Advertise


It is currently Jul Sun 21, 2019 12:01 am


All times are UTC [ DST ]





Post New Topic Post Reply  [ 6 posts ] 
Author Message
 Post subject: Drawing question
PostPosted: Nov Fri 30, 2018 1:53 am 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 4074
Location: Battle Creek, Mi
What am i looking at in the schematic drawing that looks like a plate with scribbled lines coming off the plate on the top 6L6 lead to the audio xfrmr in the drawing? Feeling a little rusty lol.

David

http://www.nostalgiaair.org/Resources/682/M0024682.htm


Top
 Profile  
 
 Post subject: Re: Drawing question
PostPosted: Nov Fri 30, 2018 2:04 am 
Member
User avatar

Joined: Jan Mon 05, 2009 4:09 am
Posts: 1354
Location: Hudson, MA
I see a cap with its reference designator marked on top of the cap, is this the part of the schematic you are referring to?
Attachment:
6L6 Output.PNG
6L6 Output.PNG [ 92.3 KiB | Viewed 337 times ]

_________________
Eddy


Top
 Profile  
 
 Post subject: Re: Drawing question
PostPosted: Nov Fri 30, 2018 2:20 am 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 4074
Location: Battle Creek, Mi
Okay i see it's a cap... Trying to figure out what value it is without the chassis pulled.


David


Top
 Profile  
 
 Post subject: Re: Drawing question
PostPosted: Nov Fri 30, 2018 2:34 am 
Member
User avatar

Joined: Jan Mon 05, 2009 4:09 am
Posts: 1354
Location: Hudson, MA
I suspect it would be the same value as the one on the lower 6L6 which is a 0.005uF according to the parts list.

_________________
Eddy


Top
 Profile  
 
 Post subject: Re: Drawing question
PostPosted: Nov Fri 30, 2018 2:46 am 
Member
User avatar

Joined: Jan Mon 05, 2009 4:09 am
Posts: 1354
Location: Hudson, MA
I found a higher resolution version:

https://www.americanradiohistory.com/Ar ... -VWXYZ.pdf

I could not find another 0.005uF with the same part number on the PL. It looks like both caps are C24 and are in the same package.

Attachment:
6L6 Output hi res.PNG
6L6 Output hi res.PNG [ 219.99 KiB | Viewed 328 times ]

_________________
Eddy


Top
 Profile  
 
 Post subject: Re: Drawing question
PostPosted: Nov Fri 30, 2018 3:04 am 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 4074
Location: Battle Creek, Mi
Thanks Eddy


Top
 Profile  
 
Post New Topic Post Reply  [ 6 posts ]  Moderators: Marcc, Norm Leal

All times are UTC [ DST ]


Who is online

Users browsing this forum: jbees, lexrageorge and 16 guests



Search for:
Jump to:  




























Privacy Policy :: Powered by phpBB