 
|
Page 1 of 1
|
[ 3 posts ] |
|
| Author |
Message |
|
ForkInSocket
|
Post subject: Knight Oscilloscope schematic  Posted: Mar Sat 10, 2018 6:41 am |
|
| Member |
 |
Joined: May Sat 17, 2014 6:55 am
Posts: 197
|
|
Hi all, I'm busy rebuilding a Knight KG-635 scope as a challenge (severe chassis rust). However, although I have the free assembly guide from BAMA (missing some of the other diagrams), it seems that the schematic sheets for this unit were not saved by anyone. I've found nobody selling copies on Ebay, and even old ARF posts just link back to BAMA. Anybody out there recently come across the schematic to this thing? I'd appreciate any help you guys can provide.
_________________
The smoke means it's working.
|
|
| Top |
|
 |
|
K7MCG
|
Post subject: Re: Knight Oscilloscope schematic Posted: Mar Sat 10, 2018 7:26 am |
|
Joined: Jan Thu 01, 1970 1:00 am
Posts: 3202
Location: Seattle WA US
|
|
| Top |
|
|
|
ForkInSocket
|
Post subject: Re: Knight Oscilloscope schematic Posted: Mar Sat 10, 2018 7:55 am |
|
| Member |
|
Joined: May Sat 17, 2014 6:55 am
Posts: 197
|
|
I appreciate the link, thank you. However, the KG-630 and KG-635 are quite different electrically. The 630 and 635 use different tubes in particular, and something I'm envious of, the 630 used a PCB for the majority of it's components compared to the point-to-point used on the 635. I did notice that in one of the comments below the article, someone actually found and posted the original schematics and manuals for the KG-630, if anyone needs them.
_________________
The smoke means it's working.
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
|
|
