|
Page 1 of 1
|
[ 3 posts ] |
|
Author |
Message |
glowplug53
|
Post subject: Sylvania 220 Tester Settings For 6CA4/EZ81 Posted: Sep Wed 15, 2021 9:30 pm |
|
Joined: Sep Wed 15, 2021 9:23 pm Posts: 14
|
Hello to all, I'm new here and no data for this rectifier. Searched high and low, any help would be great. Thanks, Al.
|
|
Top |
|
 |
Tom Bavis
|
Post subject: Re: Sylvania 220 Tester Settings For 6CA4/EZ81 Posted: Sep Fri 17, 2021 4:28 pm |
|
Joined: Jan Thu 01, 1970 1:00 am Posts: 5591 Location: Rochester NY USA
|
Is 6V4 or EZ80 listed? 6CA4/EZ81 should be same but stronger (more emission). If not, 6BW4 may test the same (Cathode is on a different pin, plates are the same)
_________________ My web page: https://bit.ly/2rxq4qx
|
|
Top |
|
 |
glowplug53
|
Post subject: Re: Sylvania 220 Tester Settings For 6CA4/EZ81 Posted: Sep Fri 17, 2021 5:53 pm |
|
Joined: Sep Wed 15, 2021 9:23 pm Posts: 14
|
Yes, the roll chart has the 6V4. That should do it, thanks again. Al
_________________ Why is there never enough time to do it right the first time⦠But always time to do it overā¦
|
|
Top |
|
 |
|
Page 1 of 1
|
[ 3 posts ] |
|
|
|